I would like to overview the Omron PLCs in SYSMAC CS1 Model ,what is new?,How to? please see below.
High Performance
Maximum power controller
To provide a background that the production capacity for sudden changes in demand, or machines that are easy on the fact that competitors are created according to market, a top speed controller, can provide the required power to support these needs will need to create a distinction must be tolerated. SYSMAC CS1 PLC reduced the maximum I / O response data and control functionality, and furnished a lot of time on the processing machines to provide a more precise control.
Human Efficiency
User-friendly environment for development
This facilitates the development of complex programs, I’m next to Windows-based integrated development environment that the new controls provided with a series of commands. Structured programming function has been improved to re-programs with greater efficiency and thus reduce the workload and reduce costs.
Heritage
Efficient use of valuable assets
Know-how to our customers over the years forms the core of competitiveness has accumulated. At OMRON, we believe in the improvement of know-how to the limit. Key to this is 100% compatible. CS1 controls allow existing units and programs are used without modification.
By increasing the capacity by 80 units and 7 at a distance of 12 meters, CS1, the needs of the large control. Alternatively, the I / O controllers and I / O interface units, which are used to two remote racks CS1 series development shall connect to a 50 m will be, and includes a total of up to 72 units and 7 shelves. CS1 Basic I / O Units, CS1 special I / O Units and CS1 CPU Bus Units can be placed anywhere on shelves and programmed without the remote programming of special requirements.
Note: C200H Units can be mounted on a remote expansion racks.
A further improvement of communication skills. Seamless network of factory increases transparency.
High-speed, high-performance data between the controllers via Ethernet / IP
EtherNet / IP. EtherNet / IP is the global standard network that uses innovative technology to the general control Ethernet network and information integration. This allows data between PLCs, data links between PLCs and multi-vendor equipment, and communications between the PLC and PTS on a common Ethernet network.
CompoNet Significantly Advances Electrical rebates, increased use of information and standardization
CompoNet is a multi-vendor network of bit-level control of around 1000 points in 1.0 ms. This report supports the communication of sensor and actuator level. Maintenance information, refer to each slave are controlled for preventive maintenance of equipment.
Building a flexible system to DeviceNet
CS1-series supports the global multi-vendor standard bus, DeviceNet. Component interconnection in multi-vendor environment are strongly associated with the connection of up to 64 knots for a wide range of applications, devices and improved FA profiles and configurator tools that ensure high reliability and easy maintenance. Production systems can be more flexible products such as multiple I / O terminal can be configured by the integration.
Function better for Ethernet
Ethernet is increasingly important standard for information networks. Up to eight socket interface for TCP / IP and UDP / IP are supported, except FINS messages, FTP file transfers and e-mail notifications to the management of production can now be organically linked with the manufacturer.
Solutions for communication within the network levels
SYSMAC CS1 allows FINS message communication over a maximum of eight levels (see note). (With CX-Programmer Ver. 4.0 or higher), compared with three levels of previous OMRON expansion systems up to eight levels, you can a seamless communication for the sending of messages by creating multiple levels of FINS Ethernet controller and link networks .
Note: For CPU Unit Ver. 2.0 or higher.
Wide range of systems, from small to large
OMRON offers a full range of reliable PLC, including the flagship CS1-series, and from small to large-scale series CP1H CV. CS1-series not only meets the needs of small to large systems, but in distributed systems. This allows you to create an optimal system for the extent and location of production applications.
Provides an exceptionally open environment with PLC-based process control to advance standardization and IT integration of the process control system.
